Long-radius uPVC fitting · Saudi Arabia
PVC & uPVC Long Radius Bend
AAMCO fabricates PVC and uPVC long bends for smoother piping transitions where a longer radius is required. Choose 45-degree, 90-degree or custom geometry for Saudi industrial projects.
- Angles
- 45° and 90°
- Radius
- Long or project-specific
- Sizes
- Standard or custom
- Material
- uPVC / PVC
Long bend project configuration
For an accurate enquiry, provide the required diameter, bend angle, centre-line radius, wall class, connection type and quantity. Custom dimensions can be reviewed against a drawing.
Typical uses
- Industrial piping turns
- Drainage transitions
- Utility pipe routing
- Custom assemblies
Custom long bends in 45° and 90°
A PVC long bend uses a wider centre-line radius than a compact elbow or short bend. This geometry can support smoother routing where the approved piping layout provides sufficient space. AAMCO fabricates uPVC long-radius bends at 45 degrees, 90 degrees and custom angles for Saudi industrial and infrastructure projects.
The fitting may be described on drawings as a long bend, long-radius bend or long-radius elbow. These phrases should be confirmed against the specified radius and dimensions rather than treated as a universal size.
Specify the required bend geometry
Send the pipe outside diameter, pipe schedule or class, angle, centre-line radius, tangent length, end type, quantity and drawing. The fabrication team will assess the requested geometry and material against the project specification.
For tighter turns, see the PVC 45° and 90° bend / elbow page. For broader project requirements, review custom PVC fabrication in Saudi Arabia.
