SCH40 fitting compatibility
For a Schedule 40 system, provide the nominal pipe size, actual outside diameter, fitting type, connection and referenced project requirement.
Pipe-compatible fitting fabrication · KSA
PVC & uPVC Fittings for Pipe Systems
AAMCO manufactures fittings—not straight pipe—for industrial, drainage, utility and duct projects. Select the compatible pipe diameter together with SCH40, SCH80, NEMA TC or metric class requirements to configure the fitting.
- Manufactured products
- PVC / uPVC fittings
- Pipe compatibility
- Inch or metric diameter
- Schedules
- SCH40 / SCH80
- Duct systems
- NEMA TC2 / TC8
PVC pipe dimensions used for fitting fabrication
The compatible fitting depends on the pipe outside diameter, wall schedule or class, application and connection method. AAMCO’s enquiry system separates inch and millimetre selections so the correct fitting geometry can be identified.
AAMCO is a PVC, HDPE and GI fittings manufacturer, not a straight-pipe manufacturer. SCH40, SCH80 and NEMA pipe terms are retained here because they are essential inputs when producing bends, bell ends, couplers, puddle flanges and other compatible fittings.
SCH80 fitting compatibility
For a Schedule 80 system, confirm diameter, wall schedule, service conditions and end-connection requirements.
NEMA duct fittings
Enquiry options can reference TC2 EPC40, TC2 EPC80 and TC8 DB120, EB35, EB20 and DB60 configurations for applicable duct fittings.
Metric class fittings
Custom fittings can be reviewed for compatible metric pipe dimensions and Class 3, Class 4 or Class 5 project requirements.
Perforated components
Submit the pipe diameter, wall class, hole size, spacing, pattern, open area, component length and drawing for fabrication review.
Slotted components
Submit slot width, length, orientation, rows, open area and the governing drawing so the fabricated requirement can be assessed.
PVC pipe and fitting questions
Does AAMCO manufacture PVC pipe?
No. AAMCO manufactures PVC and uPVC fittings and custom-fabricated components. Pipe schedules and dimensions are referenced to configure compatible fittings.
Can fittings be configured for NEMA PVC duct systems?
Yes. Provide the exact NEMA TC2 or TC8 designation, pipe dimensions and installation requirement from the project documentation.
Can AAMCO review perforated or slotted components?
These are custom fabrication requests. Provide the pipe dimensions and perforation or slot pattern so feasibility can be confirmed.