Custom uPVC fabrication · Saudi Arabia
Grease Trap Type-B
AAMCO manufactures project-configured uPVC grease traps in Saudi Arabia. Type-B is available with multiple dimensions, inlet and outlet sizes, and a custom-size option for site requirements.
- Connections
- 110MM, 160MM or 6"
- Capacity option
- 435 litres
- Material
- Fabricated uPVC
- Custom size
- Available on enquiry
Grease Trap Type-B configurations
- 1070 × 820 × 900MM with 110MM inlet and outlet
- 1070 × 820 × 900MM with 160MM inlet and outlet
- 435-litre configuration with 160MM connections
- 1200 × 750 × 50MM with 6-inch inlet and outlet
- Custom size to project specification
Internal fabrication
Saudi-made Grease Trap Type-B
AAMCO fabricates Type-B uPVC grease traps for projects in Saudi Arabia. The internal baffles, inlet and outlet sizes, access arrangement and overall dimensions are configured against the approved project requirement. The product is intended to separate fats, oils and grease from wastewater before discharge to the downstream drainage system.
Type-B is the published AAMCO configuration. If a consultant specification uses Type A, Type C or Type D terminology, submit the corresponding drawing, capacity and internal arrangement for technical review rather than relying on the type name alone.
Grease trap enquiries from Saudi Arabia and GCC
Provide the required flow or capacity, inlet and outlet levels, connection diameter, overall space available, access-cover requirement, installation location and quantity. This allows the fabrication team to assess a standard listed size or a custom configuration.
See the grease trap manufacturer guide for Saudi Arabia and GCC projects for configuration terminology and the information needed for an enquiry.
